• RONGHE RF2519 230M 230MHz 25W High Power UAV RF Data Link PCBA Module"
  • RONGHE RF2519 230M Hardware Architecture and High Performance RF Front End Components
  • RONGHE RF2519 230M Industrial Grade 100km Long Range Stable Wireless Transceiver Board
  • RONGHE RF2519 230M PCBA Module Front and Back Structural Design and Shielding Layout
  • RONGHE RF2519 230M Power Management and Industrial Communication Bus Architecture
  • RONGHE RF2519 230M Long Range Drone Telemetry and Robot Control Application Scenarios
  • RONGHE RF2519 230M 230MHz 25W High Power UAV RF Data Link PCBA Module"
  • RONGHE RF2519 230M Hardware Architecture and High Performance RF Front End Components
  • RONGHE RF2519 230M Industrial Grade 100km Long Range Stable Wireless Transceiver Board
  • RONGHE RF2519 230M PCBA Module Front and Back Structural Design and Shielding Layout
  • RONGHE RF2519 230M Power Management and Industrial Communication Bus Architecture
  • RONGHE RF2519 230M Long Range Drone Telemetry and Robot Control Application Scenarios

RONGHE RF2519 230M 230MHz 25W High Power UAV RF Data Link PCBA Module Long Range Industrial Transceiver Board

No.RH-RF2519-230M
The RONGHE RF2519 230M is an industrial-grade 230MHz 25W high-power RF transceiver PCBA engineered for mission-critical long-range data links. Built around an ARM Cortex-M3 core, high-linearity power amplifier, and advanced sub-GHz RF transceiver, it delivers reliable bidirectional telemetry exceeding 100km. Featuring exceptional receiver sensitivity, low-phase-noise clocking, and multi-bus support, it maintains rock-solid communication across -40°C to +85°C for leading industrial drones and rob
  • Core Selling Points:

    • 25W High-Power Output & 100km+ Range: Driven by a high-linearity RA30H2127 PA stage providing abundant link budget and superior signal penetration.

    • Low-Noise CC1200 Architecture: Equipped with a high-precision 26MHz reference crystal and dedicated shielding zones for maximum signal-to-noise ratio in high-EMI environments.

    • Wide Input Voltage & Clean Power Regulation: Supports 7.2V to 16V DC wide input, pairing an efficient LT1913 DC/DC regulator with dual low-noise LDOs to eliminate power ripple.

    • Comprehensive Bus Compatibility: Native UART/RS232, SPI, I2C, and GPIO interfaces enable seamless integration with commercial flight controllers and industrial PLCs.

  • Target Applications:

    • Long-endurance industrial UAV command, telemetry, and payload communication

    • Unmanned ground vehicles (UGVs), EOD robots, and pipeline inspection crawlers

    • Utility grid distribution automation (FTU/DTU) and hydrologic telemetry stations

    • Remote industrial wireless telemetry, environmental sensing, and SCADA monitoring

  • Applicable Industries:

    • Industrial drone and commercial aerospace manufacturing

    • Special robotic vehicles and automated unmanned systems

    • Smart energy, power grid, and water resource infrastructure

    • Heavy equipment remote diagnostics and industrial automation

  • Procurement & Customization Support:

    • MOQ: 1 unit for evaluation samples; competitive tiered pricing for volume deployment.

    • OEM/ODM Customization: Custom frequency tuning, proprietary protocol integration, tailored connector layouts, and specialized heat dissipation enclosures.

    • Lead Time: 3 to 5 business days for standard inventory; 2 to 3 weeks for tailored production runs.

Variations
Edit selections
Model: RF2519-230M
RF2519-230M
Select variations and quantity
Model: RF2519-230M
The min. inquiry quantity is 0. Add 0 more to continue.
RF2519-230M
-
Subtotal
-
Download
View all downloads
  • RONGHE RF2519 230M 230MHz 25W High Power UAV RF Data Link PCBA Module"
  • RONGHE RF2519 230M Hardware Architecture and High Performance RF Front End Components
  • RONGHE RF2519 230M Industrial Grade 100km Long Range Stable Wireless Transceiver Board
  • RONGHE RF2519 230M PCBA Module Front and Back Structural Design and Shielding Layout
  • RONGHE RF2519 230M Power Management and Industrial Communication Bus Architecture
  • RONGHE RF2519 230M Long Range Drone Telemetry and Robot Control Application Scenarios

Description

RONGHE RF2519 230M 230MHz 25W High Power UAV RF Data Link PCBA Module

Engineered for Mission-Critical Long-Range Wireless Links

The RONGHE RF2519 230M is an industrial-tier 230MHz radio frequency PCBA transceiver engineered for demanding airborne and ground telemetry requirements. Combining a high-linearity RF front-end module with an ultra-efficient 25W power amplifier, this board guarantees uncompromising link reliability across extended line-of-sight distances surpassing 100 kilometers.

Whether integrated into long-endurance enterprise unmanned aerial vehicles, remote inspection crawlers, or off-grid industrial telemetry nodes, the RF2519 230M maintains rock-solid data integrity under severe electromagnetic conditions.

RONGHE RF2519 230M Hardware Architecture and High Performance RF Front End Components

Industrial-Grade Hardware Topology & RF Precision

  • Core RF Transceiver: Driven by advanced sub-1GHz transceiver silicon paired with an ultra-low-noise 26MHz reference crystal, providing ultra-low phase noise and exceptional receiver sensitivity.
  • High-Linearity Power Stage: Incorporates the industry-proven RA30H2127 amplification stage and SKY13351-374LF RF switching matrix for rapid transmit/receive switching and minimal harmonic distortion.
  • ARM Cortex-M3 Computing Engine: Powered by the high-performance STM32F103ZEH6 MCU to handle real-time protocol encapsulation, link diagnostics, and multi-channel packet routing with near-zero latency.
RONGHE RF2519 230M Industrial Grade 100km Long Range Stable Wireless Transceiver Board

Detailed Technical Specifications

Parameter Item Design Specification
Operating Frequency 230MHz Band (High Penetration & Low Diffraction Loss)
Max Output Power Up to 25 Watts (Continuous High-Power Delivery)
Effective Range 100km+ Line-of-Sight (LOS) with Tuned Antennas
Modulation Schemes FSK / GFSK
Air Data Rate Configurable Up to 115.2 kbps
Supply Voltage 7.2V ~ 16V DC Wide Operating Range
Hardware Interfaces Multiple UART / RS232 (MAX3221), SPI, I2C, Multi-channel GPIO
Dimensions (L x W) 90 mm × 70 mm Compact Embedded Form Factor
Operating Temperature -40°C to +85°C (Industrial Class)
RONGHE RF2519 230M PCBA Module Front and Back Structural Design and Shielding Layout

Optimized Power Conversion & EMI Immunity

Long-range radio performance is fundamentally determined by power purity. The RF2519 230M utilizes an optimized multi-stage regulation pipeline, combining a high-efficiency DC/DC regulator (LT1913) with specialized low-noise LDOs (LP2985 and MIC5255). This eliminates phase-jitter-inducing ripple and maximizes signal-to-noise ratio during continuous full-power transmission.

The board features designated RF shielding frame zones and symmetrical thermal ground vias, enabling seamless heat dissipation to external chassis radiators without performance throttling.

RONGHE RF2519 230M Power Management and Industrial Communication Bus Architecture
RONGHE RF2519 230M Long Range Drone Telemetry and Robot Control Application Scenarios

Broad Versatility & OEM Customization

The module seamlessly integrates with industry-standard flight control computers, ruggedized ground control stations (GCS), and custom industrial PLCs. It is the premier data link choice for:

  • Long-endurance industrial UAV command, telemetry, and payload coordination
  • Explosive ordnance disposal (EOD) and inspection ground robots
  • Automated distribution networks, grid RTU/FTU monitoring, and oil pipeline SCADA links
  • Emergency tactical telemetry and remote scientific sensing stations

OEM & Engineering Customization Support

We offer comprehensive engineering customization for enterprise projects, including frequency adjustments, proprietary wireless protocol adaptations, interface modifications, and heat-sink enclosures. Fast dispatch for evaluation samples (1 pc MOQ) and scalable volume manufacturing with complete quality assurance.